The original and still the best, Volt Stick is an instant tester for safely checking the presence of an AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct operation. The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.
– Locates breaks in cables
– Detects blown fuses inside plugs or fuse holders
– Distinguishes between live and neutral wires in both single and three-phase supplies
– Identifies voltage-carrying cables in junction boxes
– Locates defective in-series light bulbs
Voltage range:
230-1000V AC
Response Time:
Immediate
Batteries:
2 x 1,5V AAA (supplied)
Relative Humidity:
80% @ 30°C, 50% @ 40°C
Operating Temperature:
-20 ~ +50°C
Overvoltage:
CAT III 1000V AC
Dimensions / Weight:
145(L) x 18(Ø) mm / 35g (including batteries)
7392016150415
VoltStick® Atex approved proximity voltage detector, indicating the presence of AC voltage without the need for electrical or galvanic connection. A clear and bright orange light indicates when voltage is present.
– Fuses, before they are removed.
– Child safe sockets without direct access to conductive parts.
– Cables and leads, find the break through the insulation.
– Serial connected light chains, find the faulty bulb.

Elma VoltStick® EX fulfills IEC 61010-1 KAT III 1000V, EX: II 2G Ex ib IIB T3 (ATEX & IECEx). Provided ready to use incl. Manual and batteries.
Voltage range:
230-1000V AC
Batteries:
2x1.5V LR 03 (incl.)
Dimensions / Weight:
146(L) x 22(Ø) mm / 40g (including batteries)
7392016115421
The Volt Stick Sound features a detection buzzer for even greater clarification. Also ideal for 'detection round corners', in bright daylight and in awkward out of sight areas. Volt Stick Sound is an instrument for safely checking the presence of an AC voltage in cables, wall sockets, fuses, junction boxes, etc. No current flow is needed for correct operation. Voltage indication by means of both a bright red light signal at the tip and a buzzer. Low battery indicator. When the buzzer does not sound while measuring, the batteries must be changed.
– Locates breaks in cables
– Detects blown fuses inside plugs or fuse holders
– Distinguishes between live and neutral wires in both single and three-phase supplies
– Identifies voltage-carrying cables in junction boxes
– Identifies faulty in-line switches
– Locates defective in-series light bulbs
Voltage range:
230-1000V AC
Sensitivity:
Indicator will illuminate at 4mm distance of
conductor carrying 230V
Response Time:
Immediate
Batteries:
2 x 1,5V AAA (supplied)
Relative Humidity:
80% @ 30°C, 50% @ 40°C
Operating Temperature:
-20 ~ +50°C
Overvoltage:
CAT III 1000V AC
Dimensions / Weight:
145(L) x 18(Ø) mm / 35g (including batteries)
7392016012973